點擊圖片放大商品名稱:
規格介紹:
Confotec MR350, MR520, MR750 - 3D 掃描雷射拉曼共軛焦顯微鏡
3D Scanning Laser Raman Confocal Microscope Confotec® series
規格介紹:Confotec MR350, MR520, MR750 - 3D 掃描雷射拉曼共軛焦顯微鏡
3D Scanning Laser Raman Confocal Microscope Confotec® series
Confotec® series
MR350, MR520, MR750
詳細介紹:
| ||
Compact Raman confocal microscopes Confotec™ MR350, Confotec™ MR520
All models have a rigid design that does not require adjustments and have both high sensitivity and high spatial resolution. Spectral measurements are provided by a highly automated 350, 520 or 750 mm focal length Imaging monochromator-spectrograph with a motorized 4-position grating turret. Performance capabilities, high reliability and compact design of confocal microscopes Confotec™ MR350, Confotec™ MR520, Confotec™ MR750 allow researchers to tackle different, crucial tasks in science and industry. Semiconductors, liquid crystals, polymers, pharmaceutical and biological substances, single molecules and nanoparticles can be objects of research.
We offer 5 configurations of a Confotec™ Raman confocal microscope to realize optimal solutions for your needs. |
特色
- ★ Modular design (the main Raman optical unit with a built-in laser is attached to the microscope, and the fiber coupled spectrograph can be arbitrarily located on a desktop or optical table)
- ★ Rigid design provides high thermal and temporal stability of spectral measurements, no pre-adjustment is needed
- ★ Nondestructive analysis, no special requirements for sample preparations
- ★ Two automatic switchable lasers with different wavelengths allow to measure Raman spectra of various samples without influence of fluorescence background
- ★ Highly automated 350, 520 or 750 mm focal length Imaging monochromator-spectrograph with a motorized 4-position grating turret provides spectral measurements
- ★ Only some sample areas are located in focus due to limited confocal depth of field. A high-speed reflected unit allows you to quickly find a sample focus areas and use them for Raman measurements. This provides a significant gain in time and allows you to immediately use a high numerical aperture objective to record high spatial resolution Raman maps
- ★ High speed simultaneous Raman and Rayleigh sample imaging using PMT detectors and a XY
galvano -mirror scanner - ★ High speed and high spatial resolution ultra-wide panoramic imaging (Raman and Rayleigh scattering) using high speed PMTs, XY
galvano -mirrors and an automated microscope stage - ★ 2D / 3D Raman imaging of a sample surface using XY
galvano -mirror / Z-piezo scanners - ★ Automatic spectral calibration
規格
The most complete configuration corresponds to the models Confotec™ MR350-SRMSp, Confotec™ MR520-SRMSp, Confotec™ MR750-SRMSp, comprising:
- microscope with an automated stage
- Raman module integrated in the optical microscope
- two automatically switching lasers: a built-in laser (473 or 532 nm), and an external one (633 or 785 nm)
- 350, 520 or 750 mm focal length Imaging monochromator-spectrograph with an automated 4-position grating turret
- digital color CCD camera for spectral measurements with Peltier cooling
- high speed PMT unit for Raman imaging (3 sec / frame, 1001 x 1001 points)
- X-Y
galvano -mirror scanner - Z-piezo scanner
- reflected unit with a high speed detection system for Rayleigh imaging (3 sec / frame, 1001 x 1001 points)
更多商品
UniDRON 顯微共軛焦拉曼/螢光光譜系統
顯微共軛焦拉曼 / 螢光光譜系統，具有強大的擴充能力及客製化的系統配置 〈包含臨場與近場光譜客製設計〉可根據應用需求設計專屬量測系統。 高效能設計，全機自動化軟體控制 採用無分光鏡設計，無論是雷射源或是拉曼訊號皆可百分之百利用。雙雷射邊緣鏡的設計更能讓拉曼訊號加倍清晰，最低偵測範圍可達60cm-1以下。整機系統切換全部由軟體控制。 全自動3D共軛焦拉曼影像 配備高解析度自動樣品載台，XY方向移動可達50nm，Z方向移動可達10nm。搭配專屬的UniSCAN掃描軟體，細微樣品的拉曼光譜影像亦可清晰呈現。 高度擴充能力 預留足夠的腔體空間，可直接架設溫控載台系統或反應設備。此外，景鴻科技與以色列Nanonics Image Co., Ltd. 合作，設計 UniDRON 專屬原子力顯微鏡 (AFM) 套件，無須任何改裝及可升級為AFM/Raman及近場光學 (NSOM) 系統。 高解析度樣品載台 低溫套件 升級AFM套件 應用 定性分析 定量分析 石墨烯 半導體 二維材料 UniDRON Brochure 下載 UniRam Brochure 下載
Confotec NR500 - 3D 掃描雷射拉曼共軛焦顯微鏡 3D Scanning Laser Raman Confocal Microscope Confotec® series NR500
特色 Simultaneous/Multifunctional Analysis: ★ Raman measurements ★ Luminiscent measurements ★ Laser Reflection and Transmission Measurements ★ 3D high-contrast images in reflected light ★ 3D Raman confocal measurements ★ Information about spectral and polarization propertis of a sample Spatial resolution: - horizontal up to 200 nm - axial up to 500 nm Wide spectral range: - 785nm: spectral range 50 - 3700cm-1 - 633nm: spectral range 60 - 6700cm-1 - 488nm: spectral range 150 - 10000cm-1 Simultaneous use of up to 5 lasers by switching over the components inside the system. The scanning system provides, alongside with point-to-point scanning, fast scanning (1000x1000 pixel per 3 seconds) of a specimen with PMT signal registration. The scanning area: 130x130 µm Specially designed monochromator-spectrograph with unique parameters: - spectral resolution up to 0.006 nm- astigmatism less than 5 µm ★ Use of inverted and upright microscopes is possible. ★ Telescope with variable magnification for adapting laser beams to entrance pupils of microobjectives from 3 to 12 mm. ★ Polarized measurements. ★ High sensitivity at low power of laser excitation (from µW to mW). ★ Reflection module for simultaneous obtaining of 3D image in reflected light. ★ Transmission measurements option. ★ Fully automated control of the system. ★ High temporal and temperature stability is provided by modular rigid and rod design. ★ No fiber optics that decrease some optical parameters (transmission, wave front, polarization). ★ Ring illumination for combination with AFM. Signal decrease from 90 % to 10 % at 200 nm, λ=514 nm, 100Х immersion lens Resolution along Z-axis.The reflection from silicon wafer, obtained by moving the objective lens along the Z axis.FW HW - 442 nm, λ=488 nm, 100x objective lens. Specially designed monochromator-spectrograph with unique parameters:spectral resolution up to 0.006 nm, astigmatism less than 5 µm.Absolute wavelength accuracy: about 0.016 nm (for grating 2400 l/mm).Pinhole spectral image at CCD camera.Pixel size: 12 µm.Pinhole size: 12 µm. Image size: 1.5 pixel Raman spectrum of Si wafer. Si (4) peak is clearly detected. Si (1) and Si (2) are in deep saturation. Confocal mode. Accumulation time - 60 seconds. 488 nm laser, 5 mW power 應用 Biosciensestudy of living cells cancerous pre-cancerous tissues, DNA, cytological investigations Material scienceinvestigation of physical structure and chemical composition of semiconductors, thin films and other materials and structures Nanotechnologystudy of physical properties of new carbonic nanomaterials such as graphene and nanotubes, determination of stress and deformation, estimation of structural order Geoscienceidentification of minerals, detection of sample components distribution and their phases; jewels characterization and inclusions determination Heritage and ArtNon-destructive identification of different findings in the result of archeological excavations, identification of pigments, undercoatings on pictures, icons, wall paintings, ceramics Organic chemistrystudy of chemical reaction mechanisms Polymer chemistrycoating technological process monitoring, investigation of polymer materials , including thin films Pharmaceuticaldetermination of distribution of pharmaceutical ingredients in drugs, raw material identification , monitoring and controlling of manufacturing processes Cosmetologyointment, cream investigations as well as their penetration capability Forensic scienceidentification of unknown substances, different types of fibers, glass, paints , explosive materials, narcotic and toxic substances
